Xusuusin:
1. Dhulka wareeggu waa gudaha ka go'doonsan dhulka chassis.
2. TFAULTis wax soo saarka ururiyaha/mareenka furan, kaas oo ay tahay in lagu soo jiido 4.7k – 10k Ohms iska caabiyaha ah ee looxa martida loo yahay haddii loogu talagalay
2. TFAULTis wax soo saarka ururiyaha/mareenka furan, kaas oo ay tahay in lagu soo jiido 4.7k – 10k Ohms iska caabiyaha ah ee looxa martida loo yahay haddii loogu talagalay
loo isticmaalo.Korantada soo jiidashada waa inay u dhaxaysaa 2.0V ilaa Vcc + 0.3V.Wax soo saar sare ayaa tilmaamaya cillad gudbiye oo ay sababtay eexda TX midkood
hadda ama awoodda wax soo saarka TX ee dhaafsiisan heerka alaarmiga ee hore loo dejiyay.Wax soo saar hoose ayaa tilmaamaya hawlgal caadi ah.In gobolka hoose, ah
wax soo saarka waxaa loo jiiday 2.0V ama furan, karti u leh TDIS <0.8V.
4. Waa in kor loogu qaadaa 4.7k - 10 kohms ee looxa martida loo yahay ilaa 2.0V iyo 3.6V.
wax soo saarka waxaa loo jiiday 2.0V ama furan, karti u leh TDIS <0.8V.
4. Waa in kor loogu qaadaa 4.7k - 10 kohms ee looxa martida loo yahay ilaa 2.0V iyo 3.6V.
MOD_DEF(0) wuxuu jiidaa xariiqda hoose si uu u muujiyo in cutubku xiran yahay.
5. LOS waa wax soo saarka ururiyaha furan.Waa in lagu soo jiido 4.7k – 10 kohms oo saaran guddiga martida loo yahay ilaa 2.0V iyo 3.6V.macquul 0
5. LOS waa wax soo saarka ururiyaha furan.Waa in lagu soo jiido 4.7k – 10 kohms oo saaran guddiga martida loo yahay ilaa 2.0V iyo 3.6V.macquul 0
waxay tilmaamaysaa hawlgal caadi ah;macquulka 1 wuxuu muujinayaa luminta calaamadda.
Jaantuska 2 Tusaalaha Qorshaha Guddida Martigelinta ee SFP
Jaantuska 3 Shabakadda shaandhaynta Guddida Martigelinta ee lagu taliyay
Foomka-Foomka Yar ee Pluggable-ka ah (SFP) Heshiiska Transceiver MultiSource (MSA)
Jaantuska 4 Qaabka Makaanikada ee Guddiga Martigelinta ee SFP
Jaantuska 5 Qaabka Makaanikada ee Guddiga Martigelinta ee SFP
Jaantuska 6 Naqshadeynta Beesalka ee lagu taliyay
Qiyaasta badeecada:
| Qaybta No. | Mawjada dhererka | Xiriiriyaha | Heerkulka | Awoodda TX (dBm) | Sens RX (Max.) (dBm) | Fogaanta |
| SFP3524-F11LC-20 | T1310FP/R 1550 | LC | -20 ilaa 70 | -9 ilaa-3 | -21 | 20km |
| SFP5324-D11LC-20 | T1550DFB/R 1310 | LC | -20 ilaa 70 | -15 ilaa-3 | -21 | |
| SFP5324-D11LC-40 | T1550DFB/R 1310 | LC | -20 ilaa 70 | -9 ilaa-3 | -24 | 40km |
| SFP3524-D11LC-40 | T1310DFB/R 1550 | LC | -20 ilaa 70 | -5 ilaa-0 | -24 | |
| SFP5424-D11LC-80 | T1550DFB/R 1310 | LC | -20 ilaa 70 | -3 ilaa 2 | -26 | 80km |
| SFP4524-D11LC-80 | T1490DFB/R 1550 | LC | -20 ilaa 70 | -3 ilaa 2 | -26 |
Macluumaadka Dalbashada:
Tusaale:
SFP 35 24 -F 1 1 LC-20
SFP 35 24 -F 1 1 LC-20
| Saxeex | Macnaheedu | Sharaxaada | |||||
| SFP | Nooca moduleka | SFP=SFP hal fiber ahtransceiver | |||||
| 35 | Hirarka dhexe | 35=1310tx/1550rx | 53=1550tx/1310rx | 45=1490tx/1550rx | 54=1550tx/1490rx | ||
| 24 | Heerka Gudbiyaha | 03=155M | 03=622M | 24=1.25G | 48=2.5G | 60=3.125G | |
| F | Nooca laser | F=FP | D=DFB | C=CWDM | V=VCSEL | ||
| 1 | Hawlgalka T | 1=0~+70℃ | 2=-40~+85℃ | ||||
| 2 | DDMI | 1=MAYA DDM | 2=DDMI | ||||
| LC | Xiriiriyaha | SC=SC | LC=LC | ||||
| 20 | Fogaanta | 022=220M | 055=550M | 5=5KM | 10=10KM | ||
| 20=20KM | 40=40KM | 80=80KM | 100=100KM | ||||
Qiimaynta ugu Sarreysa:
| Halbeegga | Astaanta | Min | Max | Unug | |
| Heerkulka Kaydinta | TS | -40 | +85 | ℃ | |
| Heerkulka shaqada | TOP | Heerka ganacsiga | -20 | +70 | ℃ |
| heerka warshadaha | -40 | 85 | |||
| Supply Voltage | VCC | -0.5 | +4.5 | V | |
| Voltage on Pin kasta | VIN | 0 | VCC | V | |
| Heerkulka iibka, Waqtiga | - | 260 ℃, 10 S | ℃,S | ||
Shuruudaha Hawleed ee lagu taliyay:
| Halbeegga | Astaanta | Min. | Nooca | Max. | Unug | |
| Heerkulka deegaanka | TAMB | Heerka ganacsiga | 0 | - | 70 | ℃ |
| heerka warshadaha | -40 | 85 | ||||
| Korontada Supply | V CC-VEE | 3 | 3.3 | 3.6 | V | |
Xaaladaha Shaqada:
1. Gudbiyaha (T=25℃, Vcc=3~3.6V (+3.3V))
| Halbeegga | Astaanta | Min. | Nooca | Max. | Unug | |||||
| Hirarka dhexda | lc | 1520 | 1550 | 1580kii | nm | |||||
| 1280 | 1310 | 1340 | ||||||||
| 1470 | 1490kii | 1510 | ||||||||
| Ballaca Spectral | △l | FP@RMS | - | 2 | 4 | nm | ||||
| DFB@-20dB FWHM | - | - | 1 | |||||||
| Awoodda wax soo saarka | 0 ~ 20km | 1.25G | 1310 FP | Po | -9 | - | -3 | dBm | ||
| 14/15 DFB | -15 | -3 | ||||||||
| 40km | 1.25G | 14/15 DFB | -9 | - | -3 | |||||
| 1310 DFB | -5 | -0 | ||||||||
| 60km | 1.25G | 14/15 DFB | -5 | 0 | ||||||
| 80km | 1.25G | 14/15 DFB | -3 | 2 | ||||||
| 100 ~ 120km | 1.25G | 14/150 DFB | 0 | 3 | ||||||
| Saamiga Dabar goynta | ER | 9 | - | dB | ||||||
| Bixinta Hadda | ICCT | - | 150 | mA | ||||||
| Wax-soo-gelinta Kala-duwanaanta Culayska | Rin | 100 | Ω | |||||||
| Kala Duwanaanshaha Xog Gelida Swing | Vin | 300 | 1200 | mV | ||||||
| Balaadhan Modulation Optical | OMA | 174 | μW | |||||||
| Gudbi Disable Voltage | VD | 2.0 | Vcc | V | ||||||
| Gudbi Awood Korantada | VEN | 0 | 0.8 | V | ||||||
| Gudbi Disable Time Assert | 10 | us | ||||||||
| Kaca/Waqtiga Dhicida indhaha | 1.25G | Tr/ Tf (20-80%) | 150 | 260 | ps | |||||
| Wax ku biirinta Jitter go'aaminta | TX ΔDJ | 20 | 56.5 | ps | ||||||
| Wadarta Tabarucaadka Jitter | TX ΔTJ | 50 | 119 | ps | ||||||
2. Qaadaha (T=25℃, Vcc=3~3.6V (+3.3V)
| Halbeegga | Astaanta | Min. | Nooca | Max. | Unug | |||
| Range dhererka hirarka | lc | 1520 | 1550 | 1580kii | nm | |||
| 1280 | 1310 | 1340 | ||||||
| 1470 | 1490kii | 1510 | ||||||
| Dareenka | 20km | 1.25G | Pin | PMIN | - | - | -21 | dBm |
| 40/60km | 1.25G | Pin | - | - | -24 | |||
| 80km | 1.25G | Pin | - | - | -26 | |||
| 100km | 1.25G | APD | -30 | |||||
| 120km | 1.25G | APD | -32 | |||||
| MAXAwoodda wax-gelinta (Saturation) | PMAX | -3 | - | - | ||||
| Xaqiijinta Signal Detect | PA | - | - | -24 | ||||
| Calaamadee calaamadaynta | PD | -45 | - | - | ||||
| Calaamadee Husteresis | FIISKA | 1 | - | 4 | ||||
| Bixinta Hadda | ICCR | - | - | 150 | mA | |||
| Kala duwanaanshaha Lulida Xogta | Ku dhawaaq | 400 | - | 1000 | mV | |||
| Soo ogow korontadu - Sare | VSDHC | 2.0 | - | VCC | V | |||
| Soo ogow koronto-yaraanta | VSDL | 0 | - | 0.8 | ||||
Xusuusin:
u beddelo xaalad sare una beddelo xaalad hoose.
1)Qiimaha awooda wax soo saarka iyo dareenka waxaa loo habeyn karaa iyadoo loo eegayo baahida.
1)Qiimaha awooda wax soo saarka iyo dareenka waxaa loo habeyn karaa iyadoo loo eegayo baahida.
Qoondaynta Pin:
| Pin | Sharaxaada | Pin | Sharaxaada |
| 1 | VEET | Ground Gudbiyaha (Caadi ah oo leh Goolka qaataha) | 1 |
| 2 | TFAULT | Khaladka Gudbinta. | 2 |
| 3 | TDIS | Daarmi gudbiyahaSoo saarista laser-ka ayaa naafo ah kor ama furan | 3 |
| 4 | MOD_DEF (2) | Qeexitaan Module 2. Khadka xogta ee Aqoonsiga Taxanaha ah. | 4 |
| 5 | MOD_DEF (1) | Qeexitaan Module 1. Khadka saacada ee Aqoonsiga Taxanaha ah. | 4 |
| 6 | MOD_DEF (0) | Qeexitaan Module 0. Ku salaysan cutubka dhexdiisa. | 4 |
| 7 | Qiimaynta Xulashada | Xiriir uma baahna | |
| 8 | LOS | Luminta calaamadda calaamadda.Macquul 0 waxa ay tilmaamaysaa hawlgal caadi ah. | 5 |
| 9 | VEER | Dhulka Qaadka (Caadi ah oo leh Goolka Gudbinta) | 1 |
| 10 | VEER | Dhulka Qaadka (Caadi ah oo leh Goolka Gudbinta) | 1 |
| 11 | VEER | Dhulka Qaadka (Caadi ah oo leh Goolka Gudbinta) | 1 |
| 12 | RD- | Qaataha DATA rogay.AC oo isku xidhan | |
| 13 | RD+ | Qaataha DATA Aan leexleexad lahayn.AC oo isku xidhan | |
| 14 | VEER | Dhulka Qaadka (Caadi ah oo leh Goolka Gudbinta) | 1 |
| 15 | VCCR | Qalabka Korontada qaataha | |
| 16 | VCCT | Korontada Gudbinta | |
| 17 | VEET | Ground Gudbiyaha (Caadi ah oo leh Goolka qaataha) | 1 |
| 18 | TD+ | Gudbiyaha Xogta Aan Roganayn ee AC. | |
| 19 | TD- | Gudbiyaha u rogay DATA gudaha AC | |
| 20 | VEET | Ground Gudbiyaha (Caadi ah oo leh Goolka qaataha) | 1
|
- 1X fiber channel
- Nidaamka kormeerka muuqaalka
- Nidaamka isgaarsiinta
Qaybaha alaabta
Halkan ku qor fariintaada oo noo soo dir