Ubushushu bomntwana oMdala weThermometer NonQhagamshelwana ne-infrared ebunzi beDijithali Umfanekiso obonakalayo

IThermometer yoBubushushu bomntwana waBadala NonQhagamshelwana ne-infrared forehead Digital

Inkcazelo emfutshane:

Igama leMveliso: I-Infrared Thermometer engaqhagamshelani nayo
Uluhlu lokulinganisa: 32°C~42.9°C
Ukuchaneka: 32 °C-34.9 °C± 0.3 °C,35 °C- 42 °C± 0.2 °C,42.1°C-42.9 °C± 0.3 °C
Ibhetri: DC 3V 2 * AAA iibhetri
Umgama wokulinganisa: 3-5cm
Ixesha lokulinganisa: 1S
Isicelo: Uvavanyo lobushushu bomzimba
iimeko eziqhelekileyo zokusingqongileyo zokusebenza: Ubushushu:16 °C-35 °C;Ukufuma okuhambelanayo:≤85%
Ixesha lokuvala ngokuzenzekelayo: <7s
Ubungakanani: 192 * 45 * 180mm

Thumela i-imeyile kuthi Khuphela i-SPEC

Iinkcukacha zeMveliso

Iithegi zeMveliso

1.Intshayelelo yeMveliso:
Le mveliso iphathwa ngesandla kodwa ingachukunyiswanga kwithemomitha ye-infrared yomzimba.Zimbini iindlela zokulinganisa: ubushushu bomzimba kunye nobushushu bomzimba.Inokugcina amaqondo obushushu bomzimba angama-34, kunye ne-alamu yobushushu bomzimba obuphezulu okanye obuphantsi.Imisebenzi yayo yile: imigangatho yobushushu eyahlukeneyo inezibane ezahlukeneyo ezikhanyisayo, ukucinywa kombane kunye nokunye.

2.Inkcazelo ngeMveliso:
1.Umboniso we-LED, bonisa amanani omlinganiselo.
2.Backlit/izitshixo zelaser, zikukukhanya ngasemva okanye ukukhanya kwelaser ngelixa ulayita okanye ucima.
3. Iqhosha lasekhohlo, lisetyenziselwa ukujonga idatha yombuzo wepateni yobushushu bomzimba;Faka imo yokumisela.
4. Iqhosha lasekunene, elisetyenziselwa ukujonga idatha yombuzo wepateni yobushushu bomzimba; Lungisa amanani xa ucwangcisa indlela.
5. Iqhosha leMODE, elisetyenziselwa imowudi yokulinganisa: Kuzo zombini isiTshayina kunye nesiNgesi tshintsha indlela yokubonisa.
6.ITransducer, eli cala lijolise kwizinto ezilinganisiweyo ngelixa lilinganisa.
7. Isitshixo somatshini, ukusetyenziswa kovavanyo lokulinganisa.
8.Ikhava yebhetri, vula kwaye ubuyisele iibhetri.

3. IiNgcaciso zeMveliso:

Ubushushu besitoreji	-10~60℃(14-140°F)
Ubushushu bokusetyenziswa	10~40°C(50~104°F)
Ukusetyenziswa kwebhetri	3V
Ubunzima	122g
Ubungakanani	145×80×40mm

4.Iiparamitha zoBugcisa:

Uluhlu lokulinganisa ubushushu	32~43℃(90~109°F)
ukuchaneka komlinganiselo wobushushu	±0.3℃(±0.6°F)
Uluhlu lomlinganiselo woBubushushu boMphezulu	0~100℃(32-212°F)
Ukuchaneka komlinganiselo wobushushu bomphezulu	±1℃(±1.8°F)
Ubuncinane bokufunda	±0.1℃(±0.1°F)
Ixesha lokuphendula	0.5s
Ukulinganisa umgama	5-8cm
Umbane ozenzekelayo ucinyiwe	7s

5.Amanqaku phambi kokusetyenziswa
1.Fakela ibhetri
2. Ukusetyenziswa kokuqala okanye xa ufaka iibhetri ezintsha linda phakathi kwemizuzu eli-10 ukufudumala kwesixhobo naxa ufaka iibhetri ezintsha.
3. Ujoliso kwibunzi (jonga umzobo ongezantsi malunga nokuma kwethemometha yomzimba yokuthintela), ukusuka kumgama we-5 cm (2 in), cofa iqhosha lokulinganisa, ubushushu buboniswa ngokukhawuleza.Ubushushu bunokuthatyathwa emva kwe-ear lobe.
4. Ngaphambi kokuthatha iqondo lobushushu qinisekisa ukususa iinwele kunye nokubila ebunzi.

6.Isilumkiso phambi kokusetyenziswa
·Iglasi ekhuselayo phezu kwelensi yeyona ndawo ibalulekileyo kunye nethambileyo yethemometha, nceda uyikhathalele kakhulu.
Coca iglasi ngelaphu lomqhaphu, imanziswe ngamanzi okanye utywala obungama-70.
·Musa ukusebenzisa ezinye iibhetri kuneebhetri ezikhankanyiweyo, musa ukuzitshaja iibhetri ezingatshajiyo.
·Musa ukubeka ithemometha ekukhanyeni kwelanga okanye emanzini.