Lintlha:
1. TX Fault ke sehlahisoa sa mokelli se bulehileng, se lokelang ho huloa ka mochine oa 4.7k ~ 10kΩ ho boto ea baeti ho ea ho motlakase pakeng tsa 2.0V le Vcc + 0.3V.
Logic 0 e bontša ts'ebetso e tloaelehileng; logic 1 e bontša phoso ea laser ea mofuta o itseng. Boemong bo tlase, tlhahiso e tla huleloa ka tlase ho 0.8V.
2. TX Disable ke sesebelisoa se sebelisetsoang ho koala transmitter optical output. E huleloa ka har'a mojule ka mohanyetsi oa 4.7k ~ 10kΩ. Maemo a eona ke:
Tlase (0~0.8V): Transmitter e butswe
(>0.8V, <2.0V): Ha e hlalosoe
Holimo (2.0 ~ 3.465V): Transmitter E holofetse
Bula: Transmitter E holofetse
3. MOD-DEF 0,1,2 ke lintlha tse hlalosang li-module. Li lokela ho huleloa ka sehanyetsi sa 4.7k ~ 10kΩ ho boto ea baeti. Matla a ho hula e tla ba VccT kapa VccR.
MOD-DEF 0 e thehiloe ke mojule ho bontša hore mojule o teng
MOD-DEF 1 ke mohala oa oache oa sehokelo sa terata tse peli bakeng sa serial ID
MOD-DEF 2 ke mohala oa data oa terata e 'meli ea serial interface bakeng sa serial ID
4. LOS ke sehlahisoa se bulehileng sa mokelli, se lokelang ho huloa ka 4.7k ~ 10kΩ mohanyetsi ho boto ea baeti ho ea ho motlakase pakeng tsa 2.0V le Vcc + 0.3V. Logic 0 e bontsha
2. TX Disable ke sesebelisoa se sebelisetsoang ho koala transmitter optical output. E huleloa ka har'a mojule ka mohanyetsi oa 4.7k ~ 10kΩ. Maemo a eona ke:
Tlase (0~0.8V): Transmitter e butswe
(>0.8V, <2.0V): Ha e hlalosoe
Holimo (2.0 ~ 3.465V): Transmitter E holofetse
Bula: Transmitter E holofetse
3. MOD-DEF 0,1,2 ke lintlha tse hlalosang li-module. Li lokela ho huleloa ka sehanyetsi sa 4.7k ~ 10kΩ ho boto ea baeti. Matla a ho hula e tla ba VccT kapa VccR.
MOD-DEF 0 e thehiloe ke mojule ho bontša hore mojule o teng
MOD-DEF 1 ke mohala oa oache oa sehokelo sa terata tse peli bakeng sa serial ID
MOD-DEF 2 ke mohala oa data oa terata e 'meli ea serial interface bakeng sa serial ID
4. LOS ke sehlahisoa se bulehileng sa mokelli, se lokelang ho huloa ka 4.7k ~ 10kΩ mohanyetsi ho boto ea baeti ho ea ho motlakase pakeng tsa 2.0V le Vcc + 0.3V. Logic 0 e bontsha
ts'ebetso e tloaelehileng; logic 1 e bontša tahlehelo ea lets'oao. Boemong bo tlase, tlhahiso e tla huleloa ka tlase ho 0.8V.
5. Tsena ke lihlahisoa tse fapaneng tsa moamoheli. Ke mela e fapaneng ea AC-couplated 100Ω e lokelang ho felisoa ka 100Ω (phapang) ho mosebelisi SERDES.
6. Tsena ke lisebelisoa tse fapaneng tsa transmitter. Ke mela e kopantsoeng ea AC, e fapaneng e nang le phapang ea 100Ω ka har'a mojule.
5. Tsena ke lihlahisoa tse fapaneng tsa moamoheli. Ke mela e fapaneng ea AC-couplated 100Ω e lokelang ho felisoa ka 100Ω (phapang) ho mosebelisi SERDES.
6. Tsena ke lisebelisoa tse fapaneng tsa transmitter. Ke mela e kopantsoeng ea AC, e fapaneng e nang le phapang ea 100Ω ka har'a mojule.
Sebaka sa Kopo se khothalelitsoeng:
Setšoantšo sa setšoantšo (mm):
Lintlha tsa sehlahisoa :
| Karolo No. | Wavelength | Sehokedi | Temp. | TX Matla (dBm) | RX Sens (Boholo.) (dBm) | Sebaka |
| SFP+ -10G-ER | 1550EML | LC | 0~70°C | -4.7 ho isa ho 4 | -15.8 | 40km |
Lintlha tse phahameng ka ho Fetisisa:
| Paramethara | Letšoao | Min | Max | Yuniti | |
| Mocheso oa polokelo | TS | -40 | +85 | ℃ | |
| Mocheso oa ho sebetsa | HLOMPHO | Boemo ba khoebo | -20 | +70 | ℃ |
| boemo ba indasteri | -40 | 85 | |||
| Phepelo ea Voltage | VCC | -0.5 | +3,6 | V | |
| Voltage ho Pin efe kapa efe | VIN | 0 | VCC | V | |
| Mocheso oa Soldering, Nako | - | 260 ℃, 10 S | ℃, S | ||
Tikoloho ea Ts'ebetso:
| Paramethara | Letšoao | Min. | Tlanya | Max. | Yuniti | |
| Ambient Mocheso | TABI | Boemo ba khoebo | 0 | - | 70 | ℃ |
| boemo ba indasteri | -40 | 85 | ||||
| Matla a Phepelo ea Matla | V CC-VEE | 3.15 | 3.3 | 3.45 | V | |
| Ho felloa ke Matla | 1 | W | ||||
| Sekhahla sa Lintlha | 10GBASE-ER | 10.3125 | Gbps | |||
Litšobotsi tsa Optical:
(Ambient Operating Temperature 0C to +70C, Vcc =3.3 V)
| Paramethara | Letšoao | Min. | Tlanya. | Max. | Diyuniti | |||
| Karolo ea Transmitter | ||||||||
| Bohareng ba Wavelength | lo | 1480 | 1550 | 1600 | nm | |||
| RMS Spectral Width | Dl | - | - | 1 | nm | |||
| Side Mode Suppression Ratio | SMSR | 30 | dB | |||||
| Karolelano ea Matla a Output | Po | -4,7 | 1 | 4 | dBm | |||
| Karolelano ea Phello | Er | 3.5 | - | - | dB | |||
| Side Mode Suppression Ratio | SMSR | 30 | dB | |||||
| Kotlo ea Phatlalatso | 2 | dB | ||||||
| Kena Phapano ea Impedans | Zin | 90 | 100 | 110 | Ω | |||
| Lerata le Matla a Batlang | RIN12OMA | -128 | dB/Hz | |||||
| Kakaretso ea jitter | Tj | 0.28 | UI(pp) | |||||
| Karolo ea Moamoheli | ||||||||
| Bohareng ba Wavelength | lo | 1260 | 1565 | nm | ||||
| Boikutlo ba ho amohela | 40km | Rsen | -15.8 | dBm | ||||
| Moamoheli o Felletseng | Rov | -1 | dBm | |||||
| Khutlisa Tahlehelo | 12 | dB | ||||||
| Tsebo ea LOS | TLHOKOMELOA | -30 | dBm | |||||
| Sejo se monate sa LOS | TLHOKOMELOD | -16,5 | dBm | |||||
| LOS Hysteresis | 0.5 | 4 | dB | |||||
| TLHOKOMELO | Phahameng | 2.0 | VCC+0.3 | V | ||||
| Tlase | 0 | 0.8 | ||||||
Litšobotsi tsa Motlakase:
(Ambient Operating Temperature 0C to +70C, Vcc =3.3 V)
| Paramethara | Letšoao | Min. | Tlanya. | Max. | unit | |
| Karolo ea Transmitter | ||||||
| Kena Phapano ea Boipuso | Zin | 90 | 100 | 110 | Ohm | |
| Phapang ea Kenyelletso ea data | Vin | 180 | 700 | mV | ||
| TX Tlosa | Thibela | 2.0 | Vcc | V | ||
| Thusa | 0 | 0.8 | V | |||
| TX Phoso | Boikemisetso | 2.0 | Vcc | V | ||
| Sejo se monate | 0 | 0.8 | V | |||
| MoamoheliKarolo | ||||||
| Phapang ea sephetho | Tloha | 85 | 100 | 115 | Ohm | |
| Tlhahiso ea data Swing Differential | Hlakola | 350 | 700 | mV | ||
| Rx_LOS | Boikemisetso | 2.0 | Vcc | V | ||
| Sejo se monate | 0 | 0.8 | V | |||
Tlhahlobo:
| Paramethara | Range | Ho nepahala | Yuniti | Tekanyetso |
| Mocheso | -5 ho isa ho 75 | ±3 | ºC | Ka hare |
| Palo ea li-volts | 0 ~ VCC | 0.1 | V | Ka hare |
| Leeme la Hona Joale | 0 ~ 35 | 0.3 | mA | Ka hare |
| Tx Matla | -8 ~ 5 | ±1 | dBm | Ka hare |
| Matla a Rx | -18 ~ 0 | ±1 | dBm | Ka hare |
tlhahisoleseling ea EEPROM (A0):
| Addr | Boholo ba Tšimo (Bayte) | Lebitso la Tšimo | HEX | Tlhaloso |
| 0 | 1 | Sekhetho | 03 | SFP |
| 1 | 1 | Ext. Sekhetho | 04 | MOD4 |
| 2 | 1 | Sehokedi | 07 | LC |
| 3-10 | 8 | Transceiver | 10 00 00 00 00 00 00 00 | Khoutu ea Transmitter |
| 11 | 1 | Khouto | 06 | 64B66B |
| 12 | 1 | BR, ka lebitso | 67 | 10000M bps |
| 13 | 1 | Reserved | 00 | |
| 14 | 1 | Bolelele (9um)-km | 00 | |
| 15 | 1 | Bolelele (9um) | 00 | |
| 16 | 1 | Bolelele (50um) | 08 | |
| 17 | 1 | Bolelele (62.5um) | 02 | |
| 18 | 1 | Bolelele (koporo) | 00 | |
| 19 | 1 | Reserved | 00 | |
| 20-35 | 16 | Lebitso la morekisi | 48 44 56 20 20 20 20 20 20 20 20 20 20 20 20 20 | HDV |
| 36 | 1 | Reserved | 00 | |
| 37-39 | 3 | Morekisi OUI | 00 00 00 | |
| 40-55 | 16 | Morekisi PN | xxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxx | ASC II |
| 56-59 | 4 | Morekisi rev | 31 2E30 20 | V1.0 |
| 60-61 | 2 | Wavelength | 05 1E | 1310nm |
| 62 | 1 | Reserved | 00 | |
| 63 | 1 | CC BASE | XX | Sheba kakaretso ea byte 0~62 |
| 64-65 | 2 | Dikgetho | 00 1A | LOS, TX_DISABLE, TX_FAULT |
| 66 | 1 | BR, max | 00 | |
| 67 | 1 | BR, mots | 00 | |
| 68-83 | 16 | Morekisi SN | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | E sa hlalosoang |
| 84-91 | 8 | Khoutu ea letsatsi la morekisi | XX XX XX 20 | Selemo, Khoeli, Letsatsi |
| 92-94 | 3 | Reserved | 00 | |
| 95 | 1 | CC_EXT | XX | Sheba kakaretso ea byte 64~94 |
| 96-255 | 160 | Morekisi ka ho khetheha |
| Lithako | Lebitso | Tlhaloso | HLOKOMELA |
| 1 | VeeT | Sebaka sa Transmitter | |
| 2 | Tx Phoso | Letšoao la Phoso ea Transmitter | 1 |
| 3 | Tx Tlosa | Transmitter Disable | 2 |
| 4 | MOD DEF2 | Tlhaloso ea Mojule 2 | 3 |
| 5 | MOD DEF1 | Tlhaloso ea Mojule 1 | 3 |
| 6 | MOD DEF0 | Tlhaloso ea Mojule 0 | 3 |
| 7 | RS0 | Ha e Kopanetsoe | |
| 8 | TLHOKOMELO | Tahlehelo ya Letshwao | 4 |
| 9 | RS1 | Ha e Kopanetsoe | |
| 10 | VeeR | Sebaka sa Moamoheli | |
| 11 | VeeR | Sebaka sa Moamoheli | |
| 12 | RD- | Inv. Sephetho se Amohetseng Data | 5 |
| 13 | RD+ | IReceived Data Output | 5 |
| 14 | VeeR | Sebaka sa Moamoheli | |
| 15 | VccR | Matla a ho amohela | |
| 16 | VccT | Matla a ho fetisa | |
| 17 | VeeT | Sebaka sa Transmitter | |
| 18 | TD+ | Fetisetsa Kenyeletso ya Boitsebiso | 6 |
| 19 | TD- | Inv. Fetisetsa Kenyeletso ya Boitsebiso | 6 |
| 20 | VeeT | Sebaka sa Transmitter |
- 10GBASE-ER ho 10.31Gbps
- 10GBASE-EW ho 9.95Gbps
- 8G/10G FC
- Sehokelo se seng sa Optical
Lihlopha tsa lihlahisoa
-
10g bidi sfp 10km 1330 1270 fiber optical trans...
-
10g Sfp+ Dual Fiber Sm 1310nm 10km 10g Lr Optic...
-
SFP 10G bidi 1270nm/1330nm optical fiber transc...
-
10g Spf+ 850nm Mode Dual Fiber 300m Optical Mod...
-
Huawei/cisco e Tsamaellana le 10g Sfp+ lr 10km 10g Sf...
-
E ka tšeptjoang le e tsitsitseng 10g sfp module 60km bidi 12...
Ngola molaetsa wa hao mona mme o re romele wona