1. Overview
2. Functional Feature
n Support EPON/GPON mode and switch mode automatically
n Support ONU auto-discovery/Link detection/remote upgrade of software
n WAN connections support Route and Bridge mode
n Route mode supports PPPoE/DHCP/ static IP
n Support QoS and DBA
n Support port Isolation and port vlan configuration
n Support Firewall function and IGMP snooping multicast feature
n Support LAN IP and DHCP Server configuration
n Support Port Forwarding and Loop-Detect
n Support TR069 remote configuration and maintenance
n Support WIFI 2.4G and WIFI 5G
n Support MIMO, 2T2R, 5dBi external antenna, rate up to 300Mbps 11n, 867Mbps 11ac
n Specialized design for system breakdown prevention to maintain stable system
3. Hardware Specification
| Technical item | Details |
| PON Interface | 1 G/EPON port(EPON PX20+ and GPON Class B+) |
| Receiving sensitivity: ≤-27dBm | |
| Transmitting optical power: 0~+4dBm | |
| Transmission distance: 20KM | |
| Wavelength | TX: 1310nm, RX: 1490nm |
| Optical Interface | SC/UPC Connector |
| LAN Interface | 4 x 10/100/1000Mbps auto adaptive Ethernet interfaces. Full/Half, RJ45 connector |
| Pots | Sip voip service |
| LED | 9 LED, For Status of PWR,LOS,PON,LAN1-4,2.4G,5.8G |
| Push-Button | 2 ,For Function of Reset and WPS |
| WIFI interface | Compliant with IEEE802.11b/g/n/ac |
| 2.4GHz Operating frequency: 2.400-2.483GHz 5.0GHz Operating frequency: 5.150-5.825GHz | |
| Support MIMO, 2T2R,5dBi external antenna, rate up to 867Mbps | |
| Support: multiple SSID | |
| TX power: 11n–22dBm/11ac–24dBm | |
| Operating Condition | Temperature: 0℃~+50℃ |
| Humidity: 10%~90%(non-condensing) | |
| Storing Condition | Temperature: -30℃~+60℃ |
| Humidity: 10%~90%(non-condensing) | |
| Power Supply | DC 12V/1A |
| Power Consumption | ≤6W |
| Dimension | 155mm×92mm×34mm(L×W×H) |
| Net Weight | 0.24Kg |
4. Panel lights Introduction
| Pilot led |
Status |
Description |
|
PWR |
On |
The device is powered up. |
|
Off |
The device is powered down. | |
|
LOS |
Blink |
The device doses not receive optical signals. |
|
Off |
The device has received optical signal. | |
|
PON |
On |
The device has registered to the PON system. |
|
Blink |
The device is registering the PON system. | |
|
Off |
The device registration is incorrect. | |
|
LAN1-4 |
On |
Port (LAN1-4) is connected properly (LINK). |
|
Blink |
Port (LAN1-4) is sending or/and receiving data (ACT). | |
|
Off |
Port (LAN1-4) connection exception or not connected. | |
|
2.4G |
On |
2.4G WIFI interface up |
|
Blink |
2.4G WIFI is sending or/and receiving data (ACT). | |
|
Off |
2.4G WIFI interface down | |
|
5G |
On |
5G WIFI interface up |
|
Blink |
5G WIFI is sending or/and receiving data (ACT). | |
|
Off |
5G WIFI interface down |
5. Application
n Typical Solution:FTTO(Office), FTTB(Building),FTTH(Home)
n Typical Business:INTERNET,AC WIFI,VoIP etc
6. Ordering information
|
Product Name |
Product Model |
Descriptions |
|
BOB Type XPON ONU |
4GE+USB+VOIP+4WiFi |
4×10/100/1000Mbps Ethernet , 1 SC/UPC Connector, Plastic Casing, External power supply adapter ,AC WiFi, pots port, USB port |