Professional Design Cisco Sfp Modules - Support OEM ODM 4GE+4WIFI+1POTS+1USB 2.4G&5G Xpon ONU AC – HDV Detail:
1. Overview
HUR4031XAC is designed as HGU (Home Gateway Unit) in deferent FTTH solutions byHDV, The carrier-class FTTH application provides data service access USB storage and VOIP service.
HUR4031XAC is based on mature and stable, cost-effective XPON technology. It can switch automatically with EPON and GPON when it access to the EPON OLT or GPON OLT.
HUR4031XAC adopts high reliability, easy management, configuration flexibility and good quality of service (QoS) guarantees to meet the technical performance of the module of China Telecom EPON CTC3.0 and GPON Standard of ITU-TG.984.X
HUR4031XAC is designed by Realtek chipset 9607C
2.Hardware Specification
| Technical item | Details |
| PON Interface | 1 G/EPON port(EPON PX20+ and GPON Class B+) |
| Receiving sensitivity: ≤-27dBm | |
| Transmitting optical power: 0~+4dBm | |
| Transmission distance: 20KM | |
| Wavelength | TX: 1310nm, RX: 1490nm |
| Optical Interface | SC/UPC Connector |
| LAN Interface | 1 x 10/100/1000Mbps auto adaptive Ethernet interfaces. Full/Half, RJ45 connector |
| Pots | Sip voip service |
| LED | 9 LED, For Status of PWR,LOS,PON,LAN1-4,2.4G,5.8G |
| Push-Button | 2 ,For Function of Reset and WPS |
| WIFI interface | Compliant with IEEE802.11b/g/n/ac |
| 2.4GHz Operating frequency: 2.400-2.483GHz 5.0GHz Operating frequency: 5.150-5.825GHz | |
| Support MIMO, 2T2R,5dBi external antenna, rate up to 687Mbps | |
| Support: multiple SSID | |
| TX power: 11n–22dBm/11ac–24dBm | |
| Operating Condition | Temperature: 0℃~+50℃ |
| Humidity: 10%~90%(non-condensing) | |
| Storing Condition | Temperature: -30℃~+60℃ |
| Humidity: 10%~90%(non-condensing) | |
| Power Supply | DC 12V/1A |
| Power Consumption | ≤6W |
| Dimension | 155mm×92mm×34mm(L×W×H) |
| Net Weight | 0.24Kg |
3. Panel lights Introduction
| Pilot led |
Status |
Description |
|
PWR |
On |
The device is powered up. |
|
Off |
The device is powered down. | |
|
LOS |
Blink |
The device doses not receive optical signals. |
|
Off |
The device has received optical signal. | |
|
PON |
On |
The device has registered to the PON system. |
|
Blink |
The device is registering the PON system. | |
|
Off |
The device registration is incorrect. | |
|
LAN1-4 |
On |
Port (LAN1-4) is connected properly (LINK). |
|
Blink |
Port (LAN1-4) is sending or/and receiving data (ACT). | |
|
Off |
Port (LAN1-4) connection exception or not connected. | |
|
2.4G |
On |
2.4G WIFI interface up |
|
Blink |
2.4G WIFI is sending or/and receiving data (ACT). | |
|
Off |
2.4G WIFI interface down | |
|
5G |
On |
5G WIFI interface up |
|
Blink |
5G WIFI is sending or/and receiving data (ACT). | |
|
Off |
5G WIFI interface down |
Product detail pictures:
Related Product Guide:
Leoni, Hengtong joint venture targets European manufacture of single-mode fiber | 1310 Sm Sfp Module
Semtech Corp (SMTC) Q1 2020 Earnings Call Transcript | Single Fiber Sfp Module
Adhering into the theory of "quality, services, efficiency and growth", now we have gained trusts and praises from domestic and international shopper for Professional Design Cisco Sfp Modules - Support OEM ODM 4GE+4WIFI+1POTS+1USB 2.4G&5G Xpon ONU AC – HDV , The product will supply to all over the world, such as: Puerto Rico, El Salvador, Belarus, All of our products comply with international quality standards and are greatly appreciated in a variety of markets around the world. If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us. We are looking forward to forming successful business relationships with new clients in the near future.
By Candance from Iran - 2015.09.21 11:01
The customer service staff's answer is very meticulous, the most important is that the product quality is very good, and packaged carefully, shipped quickly!
By Josephine from Spain - 2015.09.21 11:01
Products categories
Write your message here and send it to us