Notes:
switch from a high state to a low state.
1)Value of output power and sensitivity can be customized according to the demand
Ordering Information:
|
Sign |
Mean |
Description |
||||||
|
DSFP |
Module type |
DSFP= Dual fibers SFP |
SFP=Single fiber SFP |
|||||
|
8x |
Center wave |
30=1310tx/NO rx |
50=1550tx/NO RX |
8X=850TX any RX |
||||
|
24 |
date Rate |
03=155M |
12=622M |
24=1.25G |
48=2.5G |
60=3.125G |
||
|
V |
Laser type |
F=FP |
D=DFB |
C=CWDM |
V=VCSEL |
|||
|
1 |
Operating T |
1=-20~+70℃ |
2=-40~+85℃ |
|||||
|
1 |
DDMI |
1=NO DDM |
2=DDMI |
|||||
|
LC |
Connector |
SC=SC |
LC=LC |
|||||
|
055 |
Distance |
022=220M |
055=550M |
5=5KM |
10=10KM |
|||
|
20=20KM |
40=40KM |
80=80KM |
100=100KM |
|||||
Designing notice:

DSFP Pin description
|
Pin |
Descriptions |
Pin |
Descriptions |
|
1 |
VEET |
Transmitter Ground (Common with Receiver Ground) |
1 |
|
2 |
TFAULT |
Transmitter Fault. |
2 |
|
3 |
TDIS |
Transmitter Disable. Laser output disabled on high or open. |
3 |
|
4 |
MOD_DEF(2) |
Module Definition 2. Data line for Serial ID. |
4 |
|
5 |
MOD_DEF(1) |
Module Definition 1. Clock line for Serial ID. |
4 |
|
6 |
MOD_DEF(0) |
Module Definition 0. Grounded within the module. |
4 |
|
7 |
Rate Select |
No connection required |
|
|
8 |
LOS |
Loss of Signal indication. Logic 0 indicates normal operation. |
5 |
|
9 |
VEER |
Receiver Ground (Common with Transmitter Ground) |
1 |
|
10 |
VEER |
Receiver Ground (Common with Transmitter Ground) |
1 |
|
11 |
VEER |
Receiver Ground (Common with Transmitter Ground) |
1 |
|
12 |
RD- |
Receiver Inverted DATA out. AC Coupled |
|
|
13 |
RD+ |
Receiver Non-inverted DATA out. AC Coupled |
|
|
14 |
VEER |
Receiver Ground (Common with Transmitter Ground) |
1 |
|
15 |
VCCR |
Receiver Power Supply |
|
|
16 |
VCCT |
Transmitter Power Supply |
|
|
17 |
VEET |
Transmitter Ground (Common with Receiver Ground) |
1 |
|
18 |
TD+ |
Transmitter Non-Inverted DATA in. AC Coupled. |
|
|
19 |
TD- |
Transmitter Inverted DATA in. AC Coupled. |
|
|
20 |
VEET |
Transmitter Ground (Common with Receiver Ground) |
1 |

Small Form-factor Pluggable (SFP) Transceiver MultiSource Agreement (MSA)

SFP Host Board Mechanical Layout

Recommended Bezel Design