SFP+ 10GBASE-T Transceiver RJ45 Module 10g copper sfp

Short Description:

FEATURE:
Supports Links up to 30m using Cat 6a/7 Cable
SFF-8431 and SFF-8432 MSA Compliant
IEEE 802.3az Compliant
Low Power Consumption (2.5W max @ 30m)
Fast Retrain EMI Cancellation Algorithm
Low EMI Emissions
I2C 2 Wire Serial Interface for Serial Id and Phy Registers
Auto-negotiates with other 10GBase-T-NC PHYs
Automatic Detection and Correction of Wiring and Polarity Swaps
Robust Die Cast Housing
Bail Latch Style ejector mechanism
Unshielded and Shielded cable support


Product Detail

Product Tags

SFP+ 10GBASE-T Transceiver RJ45 Module 10g copper sfp
1、PRODUCT FEATURES
Support 10Gbase-T / 5Gbase-T / 2.5Gbase-T
Compact Compactnnector assembly
RoHS compliant and lead-free
Supply 3.3V
Ambient Operating temperature 0°C to +60°C
2、PRODUCT DESCRIPTION
SFP+-10GBASE-T Copper Small Form Pluggable (SFP) transceivers are based on the SFP Multi Source Agreement (MSA) . They are compatible with the 10Gbase-T / 5Gbase-T / 2.5Gbase-T / 1000base-T standards as specified in IEEE Std 802.3 . SFP+-10GBASE-T uses the SFP’s RX_LOS pin for link indication. If pull up SFP’s TX_DISABLE pin, PHY IC be reset.
3.、Cable Length
Standard Cable Reach Host Port
10gbase-T CAT6A 30m xfi
5Gbase-T/2.5Gbase -t CAT5E 50m 5Gbase – R/2.5GBase-X
1000base-T CAT5E 100m 1000base-FX

4、SFP to Host Connector Pin Out
Pin Symbol Name/Description Ref
1 VEET Transmitter Ground (Common with Receiver Ground) 1
2 TFAULT Transmitter Fault. Not supported
3 TDIS Transmitter Disable. Laser output disabled on high or open 2
4 MOD_DEF(2) Module Definition 2. Data line for Serial ID 3
5 MOD_DEF(1) Module Definition 1. Clock line for Serial ID 3
6 MOD_DEF(0) Module Definition 0. Grounded within the module 3
7 Rate Select No connection required
8 LOS High indicates no linked.  low indicates linked. 4
9 VEER Receiver Ground (Common with Transmitter Ground) 1
10 VEER Receiver Ground (Common with Transmitter Ground) 1
11 VEER Receiver Ground (Common with Transmitter Ground) 1
12 RD- Receiver Inverted DATA out. AC Coupled
13 RD+ Receiver Non-inverted DATA out.  AC Coupled
14 VEER Receiver Ground (Common with Transmitter Ground) 1
15 VCCR Receiver Power Supply
16 VCCT Transmitter Power Supply
17 VEET Transmitter Ground (Common with Receiver Ground) 1
18 TD+ Transmitter Non-Inverted DATA in. AC Coupled.
19 TD- Transmitter Inverted DATA in. AC Coupled.
20 VEET Transmitter Ground (Common with Receiver Ground) 1
5、+3.3V Volt Electrical Power Interface
Parameter Symbol Min Typ Max unit Notes/Conditions
Supply Current Is 700 900 mA 3.0W max power over
full range of voltage
and temperature.
InputVoltage Vcc 3.13 3.3  3.47 V Referenced to GND
Maximum Voltage Vmax 3 V
Surge Current Isurge TBD mA Hot plug above steady state
current. See caution note
below


SFP+ 10GBASE-T Transceiver Copper RJ45 Module 10g copper sfp
copper sfp module 1000base-t sfp rj45 100m optical transceiver compatible with cisco
copper sfp module 1000base-t sfp rj45 100m optical transceiver compatible with cisco

copper sfp module 1000base-t sfp rj45 100m optical transceiver compatible with cisco


  • Previous:
  • Next:

  • Write your message here and send it to us